Longines · Conquest Heritage
Strap for Conquest Heritage Chronograph
Takes 20 mm straps. Verified lug width, the straps that fit this model, and answers to the most common questions.
Lug width
Straps for the Conquest Heritage L1.641.4.75.4 (aka: L16414754)
Selected for the 20 mm lug width · workshop selection
Vintage Black Calfskin Leather Strap€80
Hammered Calfskin Strap Light Blue€98
Hammered Calfskin Watch Strap Green with Ecru Stitching€98
Vintage Olive Green Calf Leather Watch Strap€80
Hammered Black Calfskin Strap — Ecru Stitching€98
The Conquest Heritage L1.641.4.75.4 (aka: L16414754), seen from the bench
Frequently asked questions
What is the lug width of the Longines Conquest Heritage L1.641.4.75.4?
The lug width of the Longines Conquest Heritage L1.641.4.75.4 is 20mm. This is the distance between the lugs (the metal eyelets on each side of the case) where the strap attaches. To verify strap compatibility, measure with a calliper the distance between the lugs: it must be exactly 20mm. Do not confuse lug width with strap thickness, which is a separate parameter.
What is the best strap for the Longines Conquest Heritage L1.641.4.75.4?
The best strap depends on your intended use. For formal elegance: alligator or shell cordovan in brown or burgundy tones. For versatility and visible ageing: vegetable-tanned leather in cognac or bordeaux. For durability and casual wear: FKM rubber at high density or NATO in 1000D Cordura. The ideal choice reflects the sport-elegant balance of the watch, avoiding excessive decorative elements.
How do I change the strap on a Longines Conquest Heritage L1.641.4.75.4?
To change the strap, position the watch on a soft surface with the case facing downward. Locate the two spring bars (or pins) that connect the strap to the side lugs. Using a spring bar tool, gently press inward to release the internal spring mechanism of the bar, then extract the pin. Repeat on the opposite side. Insert the bars into the new strap in reverse order. Ensure the bars are fully seated within the lugs.
Is an aftermarket strap compatible with the Longines Conquest Heritage L1.641.4.75.4?
Yes, any strap with a 20mm lug width is compatible with the Longines Conquest Heritage L1.641.4.75.4. Online retailers specialising in craft straps (such as milanostraps.it) offer various leather types, colours and finishes. Always verify that the strap is specified as 20mm and that thickness is appropriate (typically 1.4–1.6mm for elegant leathers, 1.8–2.2mm for rubber).
How long does a leather strap last on the Longines Conquest Heritage L1.641.4.75.4?
A quality leather strap (alligator, shell cordovan, calf with vegetable tanning) typically lasts 3–5 years with moderate daily use. Durability depends on: frequency of use, climatic conditions, maintenance (regular cleaning, protection from excessive moisture). Artisanal straps of high quality age elegantly and permit replacement of the inner lining without damaging the strap structure. Storing the watch in a dry location significantly extends strap life.
The next step
The right strap isn't chosen. It is built, together.
From the atelier appointment to delivery, every step is made for those who know that things done well take time. Rare leathers, one piece at a time, eighteen months of warranty.
Request an appointment →Casati Milano · Via XX Settembre 15, Milan · by appointment only
