IWC · Portugieser

Strap for Portuguese Chrono-Automatic White Gold / 266 Diamond

Takes 20 mm straps. Verified lug width, the straps that fit this model, and answers to the most common questions.

Lug width

20mm
Lug width20 mm
Case diameter41 mm
ReferenceIW3714-75 (aka: 3714-75, IW371475)
FamilyPortugieser
MovementIWC caliber 79350 hours, minutes | Chronograph
CaseWhite Gold

Spring bar

Swiss Standard universal spring bars

The right category for this model · 316L steel, all lug widths 13–26 mm

Straps for the Portugieser IW3714-75 (aka: 3714-75, IW371475)

Selected for the 20 mm lug width · workshop selection

All 20 mm straps →

The Portugieser IW3714-75 (aka: 3714-75, IW371475), seen from the bench

The Portugieser Chrono-Automatic White Gold IW3714-75 is a contemporary evolution of an iconic instrument watch born in the 1930s. It features a 40.90 mm white gold case with silvered dial, Breguet hands, and Dauphine indices, powered by the IWC 79350 column-wheel chronograph movement visible through the caseback. The 20 mm lug width is the standard size for 40 mm watches, accommodating fine leather straps from alligator to cordovan or vegetable-tanned calfskin.

Frequently asked questions

What is the lug width of the IWC Portugieser IW3714-75?

The IWC Portugieser IW3714-75 features a 20 mm lug width. This measurement is taken between the two inner holes of the spring bar without compression. It is the standard dimension for watches with approximately 40 mm diameter cases.

Which strap should I choose for the IWC Portugieser IW3714-75?

For this white gold chronograph, we recommend genuine alligator in dark brown with tight grain, or shell cordovan in mahogany tone. Both materials develop a natural patina that complements the ageing of white gold. If you prefer versatility, vegetable-tanned calf in anthracite grey or sand maintains formality without the maintenance demands of exotic leathers.

How do I change the strap on my IWC Portugieser?

Use a spring bar tool sized for 20 mm lugs. Insert the fine tip into the spring bar hole and gently lift the lug to release the bar from its seat. Repeat on the opposite side. When fitting the new strap, ensure the bar is horizontally aligned and that both ends click into position with an audible snap.

Is an aftermarket strap compatible with the IWC Portugieser IW3714-75?

Yes, any strap with a 20 mm lug width is compatible with this model. High-quality bespoke straps—crafted from alligator, shell cordovan, vegetable-tanned calf, or FKM rubber—do not compromise functionality. Verify that the leather thickness (typically 1.4–1.6 mm) allows natural flexing around the wrist without excessive initial stiffness.

How long does a quality leather strap last on the Portugieser?

A quality exotic leather strap (alligator, cordovan) lasts 5–8 years with ordinary care: drying after humidity exposure, avoiding temperature swings, periodic cleaning with a damp cloth. Vegetable-tanned calves have similar or greater longevity. Primary wear concentrates on the buckle and the fold zone around the lugs. Casati Milano guarantees bespoke straps for 18 months.

The next step

The right strap isn't chosen. It is built, together.

From the atelier appointment to delivery, every step is made for those who know that things done well take time. Rare leathers, one piece at a time, eighteen months of warranty.

Request an appointment →

Casati Milano · Via XX Settembre 15, Milan · by appointment only