Strap for Pavonina Date Stainless Steel / Red Gold / MOP

The lug width (ansa width) of the Pavonina 1-03-01-26-06-04 is 18 millimetres. This measurement represents the distance between the two spring bar pins that connect the case to the strap, measured orthogonally. To verify, remove the original strap and measure precisely the distance between the case lugs using callipers.

For the Pavonina, we recommend vegetable-tanned alligator with natural patina for formal elegance, smooth calf leather in brown or black tones for daily versatility, or a NATO strap in canvas for sportive wear. Your choice depends on occasion and colour preference. The mother-of-pearl dial dialogues particularly well with textured and naturalistic leather surfaces.

Strap replacement requires a spring bar tool (a small implement with two forked ends). Insert the tool's end into the small hole of the spring bar, apply gentle pressure to extend the spring, and slide the bar out. Repeat on the opposite side. Insert the new bar into the strap, reposition it in the case lugs, and allow the spring to contract naturally.

Yes, the Pavonina 1-03-01-26-06-04 is fully compatible with aftermarket straps measuring 18mm lug width. Milano Straps offers a curated selection of straps in alligator, calf, shell cordovan, NATO, and rubber—all suitable for this lug width. Always verify strap compatibility with 18mm and ensure your watch lugs are sufficiently resilient for standard spring bars.

A quality leather strap (alligator, shell cordovan, vegetable-tanned calf) lasts approximately 3–5 years with daily wear, assuming proper maintenance: rapid drying after water exposure, occasional cleaning with damp cloths, and treatment with natural wax or oil every 12–18 months. Vegetable-tanned leather develops a protective patina naturally, extending longevity. A vulcanised rubber strap has virtually unlimited lifespan (10+ years) and requires minimal maintenance.