Strap for PanoMatic Counter XL Stainless Steel / Black / Folding

The lug width of the Glashütte Original Pano 1-96-01-02-02-50 is 20mm. This is the distance between the centres of the two lug attachment holes. To measure correctly, use a digital calliper and measure the internal space between the spring bar holes, not the external diameter of the bars themselves.

For the Pano 1-96-01-02-02-50, we recommend Nile alligator straps for a minimalist aesthetic that contrasts with the open-work dial, vegetable-tanned calf leather for those seeking a patina that ages naturally alongside the watch, or shell cordovan for lasting longevity. Textile alternatives (NATO) and rubber offer operational practicality without construction compromises.

The Pano's strap is changed by removing the spring bars—the two small horizontal pins in the case lugs. Using a dedicated tool or small screwdriver, gently compress one side of the pin to create clearance, then remove the old strap. Insert the new strap by aligning the holes with the spring bar ends and press until the locking click is felt. Repeat on both sides.

Yes, the Pano is fully compatible with any well-constructed 20mm strap. The 20mm lug width is an international standard. Ensure that the chosen strap has thickness proportionate to the case—the Pano has considerable presence and requires straps of adequate gauge—and that the pins are stainless steel to prevent differential oxidation.

Leather strap longevity depends on tanning method and frequency of use. A vegetable-tanned calf strap typically lasts 3–5 years under daily wear, maintaining good aesthetic condition. Shell cordovan can exceed 10 years. Shell cordovan is particularly resistant to abrasion, whilst standard calf develops a beautiful patina whilst thinning gradually in flex zones. Avoid prolonged water immersion and direct sunlight drying to preserve the leather.