Formex · Diver

Strap for Diver Quartz GMT White / Calf

Takes 22 mm straps. Verified lug width, the straps that fit this model, and answers to the most common questions.

Lug width22 mm
Case diameter47 mm
Reference2100.3.2012.213
FamilyDiver
MovementRonda caliber 515.24 D Hours, Minutes, Seconds, Additional 24 Hour Hand (adjustable) | Date
CaseTitanium, Stainless Steel

Spring bar

Swiss Standard universal spring bars

The right category for this model · 316L steel, all lug widths 13–26 mm

Straps for the Diver 2100.3.2012.213

Selected for the 22 mm lug width · workshop selection

All 22 mm straps →

The Diver 2100.3.2012.213, seen from the bench

The Formex Diver reference 2100.3.2012.213 is powered by the Ronda 515.24 D quartz calibre with hour, minute, second and adjustable GMT hand functions. The movement includes a date indication in addition to the standard time functions. The watch features 22mm lugs for the strap.

Frequently asked questions

What is the lug width of the Formex Diver 2100.3.2012.213?

The Formex Diver 2100.3.2012.213 features a 22mm lug width. This measurement refers to the internal distance between the two lugs of the case where the strap attaches. To verify compatibility with a new strap, measure with a digital calliper from the inner point of the upper lug to the inner point of the lower lug, excluding the external case edges.

Which strap is most suitable for the Formex Diver 2100.3.2012.213?

For marine environment usage, vegetable-tanned Tuscan leather is optimal: it maintains elasticity even after repeated salt exposure and develops a deep patina over time. For frequent and technical diving, NATO straps in ballistic nylon ensure rapid drying and total water resistance. FKM rubber straps offer maximum grip in wet conditions. Natural alligator leather represents an elegant option for less extreme usage.

How do you change the strap on the Formex Diver 2100.3.2012.213?

Position the watch on a soft mat with the caseback facing upward. Use a spring bar tool to compress the internal spring bar on one lug from below, then slide the bar out of the case lug. Repeat on the opposite end. To install the new strap, insert the bar into the lower hole of the strap, position the end in the case lug, then compress the bar with the spring bar tool and snap it into the upper lug. Verify that the strap is securely attached before wearing.

Which aftermarket straps are compatible with the Formex Diver 2100.3.2012.213?

Any strap with a 22mm lug width is compatible with the 2100.3.2012.213. milanostraps.it offers a wide selection of handcrafted 22mm straps, including vegetable-tanned Tuscan leather, alligator, shell cordovan, NATO ballistic nylon, and technical rubber straps. Compatibility is guaranteed by measuring the internal distance between the case lugs.

How long does a leather strap last on the Formex Diver 2100.3.2012.213?

Leather strap durability depends on usage frequency and environmental conditions. High-quality vegetable-tanned Tuscan leather, used regularly in marine environments but properly dried and maintained, can last 3-5 years. Repeated salt exposure accelerates wear; rinse the strap with fresh water after each dive and allow it to dry completely. Rubber and NATO straps, being synthetic, offer superior durability in extreme environments but still require periodic inspection of spring bars.

The next step

The right strap isn't chosen. It is built, together.

From the atelier appointment to delivery, every step is made for those who know that things done well take time. Rare leathers, one piece at a time, eighteen months of warranty.

Request an appointment →

Casati Milano · Via XX Settembre 15, Milan · by appointment only