D. Dornblueth & Sohn · 99.0
Strap for 99.0
Takes 22 mm straps. Verified lug width, the straps that fit this model, and answers to the most common questions.
Lug width
Straps for the 99.0 99.0 (1) ST
Selected for the 22 mm lug width · workshop selection
Recycled Nylon Military Strap — Grey with Red Stitching€52
Light Blue Recycled Military Strap with Red Stitching€52
Eco Recycled Nylon Military NATO Strap — Green with Green Stitching€52
Recycled Nylon Military NATO Strap — Red and Black Edges€52
Eco-Friendly Recycled Nylon Military NATO Strap — Green with Orange Edges€52
The 99.0 99.0 (1) ST, seen from the bench
Frequently asked questions
What is the lug width of the D. Dornblueth & Sohn 99.0 (1) ST?
The lug width of the D. Dornblueth & Sohn 99.0 (1) ST is 22 millimetres. This measurement is essential for strap selection: straps narrower or wider than 22mm will not fit correctly. Always measure your watch by placing a calliper perpendicular to the lugs, from one end to the other of the internal support, to ensure complete compatibility.
What is the best strap for the D. Dornblueth & Sohn 99.0 (1) ST?
The best strap depends on your usage and aesthetic preference. For daily elegance, we recommend Tuscan leather in vegetable tanning, black or brown: the progressive patina evolves over time creating visual continuity with the dial. For formal contexts, an alligator in cognac colour translates the restrained aesthetic of the steel case into a statement of refinement. For urban practicality, a dark grey NATO guarantees relative water resistance and ease of maintenance. The 22mm lug width remains constant across all options.
How do I change the strap on my D. Dornblueth & Sohn 99.0 (1) ST?
Strap replacement requires two minimal tools: a spring bar remover or a small flat-blade screwdriver. Position the watch with the case facing upwards. Gently insert the tool tip under the metal pin connecting the strap to the case, applying slight pressure to disengage it from its seat. Repeat on the other side. Remove the worn strap. Insert the new 22mm strap, aligning the holes with the pins, and press until you hear the locking click. Never force: a controlled movement preserves the case.
Can I use an aftermarket strap on my D. Dornblueth & Sohn watch?
Yes, entirely. Aftermarket straps compatible with 22mm lug width fit the D. Dornblueth & Sohn 99.0 (1) ST perfectly. Milano Straps supplies exclusively dimensionally certified straps for this width, eliminating the risk of incompatibility. The advantage of an aftermarket strap is aesthetic freedom: you can choose the material, colour and finish that best harmonises with your case and personal style, without any compromise on constructive quality.
How long does a quality leather strap last on the D. Dornblueth & Sohn 99.0 (1) ST?
The lifespan of a leather strap depends on usage and maintenance. An artisanal vegetable-tanned strap, worn daily and properly cared for, typically lasts 3-5 years before replacement is required. Leather will tend to develop natural cracks in the zones of maximum flex (mainly at the lug attachment points). Patina and colour evolution are desirable externally, but internal signs of wear require attention: if you notice lining detachment or excessive stiffness, it is time to change. A NATO or vulcanised rubber strap offers superior longevity, often 5-8 years, owing to lower vulnerability to oxidation and dryness phenomena.
The next step
The right strap isn't chosen. It is built, together.
From the atelier appointment to delivery, every step is made for those who know that things done well take time. Rare leathers, one piece at a time, eighteen months of warranty.
Request an appointment →Casati Milano · Via XX Settembre 15, Milan · by appointment only
