Certina · DS First
Strap for DS First Ceramic Strap
Takes 22 mm straps. Verified lug width, the straps that fit this model, and answers to the most common questions.
Lug width
Straps for the DS First C0144101605100
Selected for the 22 mm lug width · workshop selection
Recycled Nylon Military Strap — Grey with Red Stitching€52
Light Blue Recycled Military Strap with Red Stitching€52
Eco Recycled Nylon Military NATO Strap — Green with Green Stitching€52
Recycled Nylon Military NATO Strap — Red and Black Edges€52
Eco-Friendly Recycled Nylon Military NATO Strap — Green with Orange Edges€52
The DS First C0144101605100, seen from the bench
Frequently asked questions
What is the exact lug width of the Certina DS First C0144101605100?
The lug width of the Certina DS First C0144101605100 is 22mm. This measurement is taken at the deepest point between the two spring bar pins, where the strap inserts into the case lugs. An accurate digital calliper measurement should return a value between 21.8mm and 22.2mm to ensure optimal compatibility without friction or excessive movement.
Which strap do you recommend for the Certina DS First C0144101605100?
For this model, we recommend a strap in vegetable-tanned Tuscan leather, such as the Carbone Suprema, which amplifies the sport-elegant character of the hybrid ceramic and steel case. The practical alternative is a NATO in technical polyamide for maximum versatility, or structured FKM rubber if you use the watch frequently in aquatic environments. Your choice depends on your lifestyle and the patina you wish to see develop over time.
How do I change the strap on the Certina DS First C0144101605100?
The strap is changed using a dedicated tool (spring bar tool) to push the elastic pins inward, releasing the lugs. Position the tool tip in the small hole on one side of the lug and gently push towards the case centre, releasing the pin. Remove the old strap, insert the new one by aligning the holes with the elastic pins, and let it click into position. Verify that the strap is perfectly secure before wearing the watch.
Is the Certina DS First C0144101605100 compatible with 22mm aftermarket straps?
Yes, the Certina DS First C0144101605100 is fully compatible with high-quality 22mm aftermarket straps, provided the lug measurement is accurate and the strap is manufactured with correct tolerances. Always verify that the seller measures and certifies compatibility. A 22mm strap from a reputable manufacturer will ensure smooth operation and no risk of damage to the case spring bar pins.
How long does a Tuscan leather strap last on the Certina DS First C0144101605100?
A vegetable-tanned Tuscan leather strap typically lasts 3–5 years of daily wear, depending on sun exposure, humidity and cleaning frequency. Vegetable-tanned leather develops a natural patina over time, but also gradual loss of elasticity. To extend longevity, we recommend avoiding prolonged water exposure, occasionally applying a natural conditioner, and rotating with other straps. With careful maintenance, the service life can reach 6–7 years.
The next step
The right strap isn't chosen. It is built, together.
From the atelier appointment to delivery, every step is made for those who know that things done well take time. Rare leathers, one piece at a time, eighteen months of warranty.
Request an appointment →Casati Milano · Via XX Settembre 15, Milan · by appointment only
