Breitling · Transocean

Strap for Transocean Chronograph Stainless Steel / Diamond / Panda / Military

Takes 22 mm straps. Verified lug width, the straps that fit this model, and answers to the most common questions.

Lug width22 mm
Case diameter43 mm
ReferenceAB015253.G724.109W
FamilyTransocean
MovementBreitling caliber Caliber B01 Hours, Minutes, Small Seconds | Date | Chronograph, Column wheel | Chronometer
CaseStainless Steel

Spring bar

Swiss Standard universal spring bars

The right category for this model · 316L steel, all lug widths 13–26 mm

Straps for the Transocean AB015253.G724.109W

Selected for the 22 mm lug width · workshop selection

All 22 mm straps →

The Transocean AB015253.G724.109W, seen from the bench

The Transocean features the automatic B01 caliber with chronograph function and column-wheel, certified as a chronometer. The case features 22mm lugs. The movement offers indication of hours, minutes, small seconds and date.

Frequently asked questions

What is the lug width of the Breitling Transocean AB015253.G724.109W?

The Breitling Transocean AB015253.G724.109W features a lug width of 22mm. This measurement should be taken with a digital calliper at the inner lower section of the lugs, where the strap inserts into the case. Respecting this dimension is essential to ensure a correct and secure fit for any replacement strap.

What is the best strap for the Breitling Transocean AB015253.G724.109W?

Given the silver dial and stainless steel case of the Transocean, an alligator leather strap in Havana brown or navy blue offers the most coherent pairing with the model's elegant character. Vegetable-tanned Barenia calf leather is a refined alternative for those seeking a strap that develops a noble patina over time. For more casual settings, a nylon or silk NATO strap in neutral tones is a practical and stylistically sound choice.

How do you change the strap on a Breitling Transocean AB015253.G724.109W?

The strap is replaced using a spring bar tool: the forked tip is inserted into the lateral groove of the spring bar, which is compressed between the lugs. Remove one end first, then the other. Take care not to scratch the stainless steel case; it is advisable to protect the case with a soft cloth during the operation. The new strap is fitted by inserting the spring bar on one side and compressing it on the other until it clicks into place.

Is there an aftermarket strap compatible with the Breitling Transocean AB015253.G724.109W?

Yes. Any strap with a 22mm lug width and a straight end is compatible with the Transocean. The handcrafted straps by Milano Straps and Casati Milano are made to measure for this configuration, available in alligator leather, vegetable-tanned calf, NATO fabric and technical rubber. Italian artisan quality ensures superior fit and longevity compared to mass-produced alternatives.

How long does a leather strap last on a Breitling Transocean?

A quality leather strap worn daily typically lasts between 18 and 36 months, depending on the leather type, level of care and conditions of use. Vegetable-tanned leathers such as Barenia tend to last longer, developing a distinctive patina over time. It is advisable to avoid prolonged contact with water and perspiration, to dry the strap after use and to rotate between straps periodically to extend their service life.

The next step

The right strap isn't chosen. It is built, together.

From the atelier appointment to delivery, every step is made for those who know that things done well take time. Rare leathers, one piece at a time, eighteen months of warranty.

Request an appointment →

Casati Milano · Via XX Settembre 15, Milan · by appointment only