Breitling · Superocean

Strap for Superocean 44 Special Stainless Steel / Marine Blue / Bracelet

Takes 22 mm straps. Verified lug width, the straps that fit this model, and answers to the most common questions.

Lug width22 mm
Case diameter44 mm
ReferenceY17393161C1A1 (aka: Y1739316.C959.162A)
FamilySuperocean
MovementBreitling caliber 17 hours, minutes, seconds | date
Year2017 - 2019
CaseStainless Steel

Spring bar

Swiss Standard universal spring bars

The right category for this model · 316L steel, all lug widths 13–26 mm

Straps for the Superocean Y17393161C1A1 (aka: Y1739316.C959.162A)

Selected for the 22 mm lug width · workshop selection

All 22 mm straps →

Frequently asked questions

What is the lug width of the Breitling Superocean Y17393161C1A1?

The lug width of the Breitling Superocean Y17393161C1A1 is 22mm. This measurement corresponds to the internal distance between the lugs of the 44mm case and is the only compatible strap width without adapters. To confirm the measurement, you can measure the original strap at the point where it meets the case, or use a digital calliper directly on the lugs.

What is the best strap for the Breitling Superocean Y17393161C1A1?

The ideal choice depends on intended use. For aquatic or intense sporting use, vulcanised rubber is the most functional option: resistant to salt water and comfortable on a wet wrist. For a more refined setting, an alligator strap with vegetable tanning offers an elegant contrast against the steel case. A ballistic nylon NATO strap is ideal for daily wear due to its practicality and durability. All straps must have a 22mm attachment width.

How do you change the strap on a Breitling Superocean Y17393161C1A1?

Strap replacement requires a spring bar tool, a forked instrument used to compress the spring bars housed within the case lugs. By inserting the forked tip between the strap and the lug, you compress the spring bar and release the strap. The operation takes approximately two minutes per side and does not require professional assistance, provided you proceed carefully to avoid scratching the case.

Are there aftermarket straps compatible with the Breitling Superocean Y17393161C1A1?

Yes. All straps with a 22mm attachment are technically compatible with the Breitling Superocean Y17393161C1A1. It is advisable to also verify the spring bar length (ideally 20mm or longer) to ensure a secure fit on the original Breitling lugs, which have a greater depth than many mid-range timepieces. Milanostraps.it offers a selection of handcrafted 22mm straps available ready to ship or made to order.

How long does a leather strap last on a Breitling Superocean Y17393161C1A1?

The lifespan of a leather strap depends primarily on the material, tanning method and daily use. A vegetable-tanned calfskin strap worn daily with normal perspiration exposure typically lasts 18 to 36 months. A high-quality alligator strap can last 3 to 5 years with proper care (leather conditioner every three months, protection from prolonged moisture). Leather straps are not recommended for aquatic use; rubber or NATO straps are preferable in water.

The next step

The right strap isn't chosen. It is built, together.

From the atelier appointment to delivery, every step is made for those who know that things done well take time. Rare leathers, one piece at a time, eighteen months of warranty.

Request an appointment →

Casati Milano · Via XX Settembre 15, Milan · by appointment only