Bausele · Diver

Strap for Oceanmoon IV Orca Black

Takes 22 mm straps. Verified lug width, the straps that fit this model, and answers to the most common questions.

Lug width22 mm
Case diameter42 mm
ReferenceAOMVSSR1BL1
FamilyDiver
MovementSellita caliber SW200-1 b Hours, Minutes, Seconds
CaseStainless Steel

Spring bar

Swiss Standard universal spring bars

The right category for this model · 316L steel, all lug widths 13–26 mm

Straps for the Diver AOMVSSR1BL1

Selected for the 22 mm lug width · workshop selection

All 22 mm straps →

The Diver AOMVSSR1BL1, seen from the bench

The Bausele Diver features the Sellita SW200-1 caliber with hour, minute and second indications. The watch has 22mm lugs for the strap. The AOMVSSR1BL1 reference identifies this variant of the Australian brand's dive collection.

Frequently asked questions

What is the lug width of the Bausele Diver AOMVSSR1BL1?

The lug width of the Bausele Diver AOMVSSR1BL1 is 22 millimetres. This specific dimension determines aftermarket strap compatibility and must be measured perpendicularly across the case, between the inner edges of the lugs. Always verify this measurement before purchasing a replacement strap.

Which strap is best suited to the Bausele Diver AOMVSSR1BL1?

Selection depends on intended use and aesthetic preference. For original diving-focused capability, a NATO Premium strap or FKM rubber ensures functionality, rapid drying and minimal maintenance. For more formal occasions, an alligator strap with vegetable tanning or shell cordovan offers sophistication whilst maintaining coherence with the watch's tool-oriented character. Chromium-tanned calf leather represents a balanced compromise between versatility and formality.

How do you change the strap on the Bausele Diver AOMVSSR1BL1?

To change the strap, use a spring bar remover or dedicated tool to decouple the lug pins from the case. Position the tool's tip beneath the pin, apply gentle pressure until the pin disengages, then extract the worn strap. Insert the new strap by aligning its holes with the lugs and push the pin inward until it clicks. Verify that both sides are correctly seated before wearing the watch.

Are aftermarket straps compatible with the AOMVSSR1BL1?

Yes, all straps with a 22-millimetre lug width are compatible with the Bausele Diver AOMVSSR1BL1, regardless of material (leather, NATO, rubber). Always ensure the strap features correct lug holes and width consistency with the case. Specialised atelier straps such as those from Milano Straps guarantee superior build quality and finishing compared to generic products.

How long does a leather strap last on the Bausele Diver case?

Leather strap longevity depends on tanning method, intensity of use and climate conditions. A shell cordovan strap with vegetable tanning on a diver exposed to saltwater environments typically lasts 3–4 years with regular maintenance (cleaning, immediate drying after saltwater contact, periodic protective treatments). Chromium-tanned calf leather typically lasts 2–3 years. Rubber and NATO, being technical materials, can exceed 5 years with minimal wear if not exposed to prolonged UV exposure.

The next step

The right strap isn't chosen. It is built, together.

From the atelier appointment to delivery, every step is made for those who know that things done well take time. Rare leathers, one piece at a time, eighteen months of warranty.

Request an appointment →

Casati Milano · Via XX Settembre 15, Milan · by appointment only