Arnold & Son · Royal Collection
Strap for HM Horses
Takes 20 mm straps. Verified lug width, the straps that fit this model, and answers to the most common questions.
Lug width
Straps for the Royal Collection 1LCAP.W03A.C111A
Selected for the 20 mm lug width · workshop selection
Vintage Black Calfskin Leather Strap€80
Saffiano Dark Brown Tonal Strap€90
Hammered Pink Strap with Ecru Stitching€98
Dark Brown Calfskin Military Strap€80
Black Saffiano Rubber Strap€105
The Royal Collection 1LCAP.W03A.C111A, seen from the bench
Frequently asked questions
What is the lug width of the Arnold & Son Royal Collection 1LCAP.W03A.C111A?
The lug width of the 1LCAP.W03A.C111A model is exactly 20mm. This measurement represents the distance between the lugs (the metal attachments on the case sides) from hole to hole, and is the fundamental parameter ensuring mechanical and aesthetic compatibility with any aftermarket strap. Precise measurement is essential to avoid mechanical play or installation issues.
Which strap is recommended for this Arnold & Son model?
For the rose gold 1LCAP.W03A.C111A, high-quality European alligator straps in cognac or mid-brown tones are the ideal choice: the natural texture amplifies the perception of discrete luxury. Valid alternatives include shell cordovan with vegetable tanning (which develops patina over time, paralleling the gold) and fine-grained vegetable-tanned calf leather. For sports contexts, heavyweight cotton NATO fabrics maintain aesthetic equilibrium without compromise.
How do I change the strap on a 20mm lug width watch?
The process requires specific tools: a spring bar tool and a pushing pin. Position the watch with the lug facing upward, insert the pin into the small hole on the lug (the internal groove), and apply gentle pressure to release the spring bar passing through. Once the bar is extracted, the old strap detaches. Installing the new strap follows the reverse procedure: position the strap ends in the lug holes and carefully reinsert the spring bar, verifying it is fully inserted and secured.
Can I use an aftermarket 20mm strap on this Arnold & Son watch?
Yes, absolutely. As long as the strap is specifically dimensioned for 20mm lug width and manufactured by quality craftspeople, it is completely compatible. It is advisable to verify that the strap thickness (typically between 3.5mm and 4.5mm) is proportionate to the case: straps that are too thin appear visually fragile, while excessively thick straps create proportional disharmony. Milano Straps stocks straps tested for mechanical compatibility and aesthetic rendering.
What is the average lifespan of a leather strap on a 20mm watch?
The longevity of a leather strap depends on tanning type and frequency of use. A high-quality European alligator strap with vegetable tanning can last 3 to 5 years under daily wear. Shell cordovan, thanks to superior fiber density, can reach 5–7 years. Vegetable-tanned calf leather, being softer, typically shows signs of wear after 2–3 years of intensive use. Critical factors include direct sunlight exposure, moisture, and body perspiration. Periodic cleaning and storage in a dry environment significantly extend lifespan.
The next step
The right strap isn't chosen. It is built, together.
From the atelier appointment to delivery, every step is made for those who know that things done well take time. Rare leathers, one piece at a time, eighteen months of warranty.
Request an appointment →Casati Milano · Via XX Settembre 15, Milan · by appointment only
