A. Lange & Söhne · Saxonia
Strap for Datograph Perpetual Rose Gold / Silver
Takes 20 mm straps. Verified lug width, the straps that fit this model, and answers to the most common questions.
Lug width
Straps for the Saxonia 410.032
Selected for the 20 mm lug width · workshop selection
Black Rubberized Alligator Strap with Blue Tribal Stitching€145
Black Alligator Strap with White Edges€149
Red Gummy Alligator Strap with Blue Tribal Stitching - 20mm€185
Horween Cordovan Brown Watch Strap€145
Green Cordovan Strap€145
The Saxonia 410.032, seen from the bench
Frequently asked questions
What is the lug width of the A. Lange & Söhne Saxonia 410.032?
The Saxonia 410.032 is equipped with a lug width of 20 millimetres. This measurement represents the distance between the two connection holes where the strap attaches to the case. The 20mm specification is the essential parameter for identifying compatible straps; any other width would create mechanical play or abnormal stress on the lugs. Manufacturing tolerance is less than one-tenth of a millimetre.
Which strap material pairs best with the rose gold Saxonia 410.032?
Alligator and shell cordovan represent the most coherent solutions. Alligator in dark brown tones (bordeaux, cognac, mahogany) naturally emphasises the warm reflections of rose gold, whilst cordovan develops a patina over time that amplifies the elegance of the pairing. Vegetable-tanned calf leather offers aesthetic minimalism but requires regular maintenance. For sporty versatility, rubber or NATO fabric provide functional alternatives without aesthetic pretensions.
How do you change the strap on a watch like the 410.032?
The Saxonia 410.032 features fixed lugs without decorative scalloping, which simplifies the operation. You will need a spring bar tool to remove the connection pins. Position the watch face-down on a soft surface (microfibre cloth), insert the tool's tip into one of the small holes beside the lug and gently lift the pin upward. Repeat for the second pin. Remove the worn strap. Thread the new strap by inserting the pins into the case holes, ensuring the strap is perfectly aligned. Never force; the pins should enter with moderate, uniform pressure.
Can I use an aftermarket compatible strap on an A. Lange & Söhne Saxonia?
Yes, provided the strap has been manufactured for the specific 20-millimetre lug width. A quality artisanal strap, crafted with superior materials (alligator, cordovan, calf), is not only compatible but amplifies the aesthetic value of the watch. However, it is essential to verify that the strap's construction quality equals that of the watch: a Saxonia deserves excellence in the sartorial solution as well, not compromises. Casati Milano offers custom-made straps, constructed and tested to Haute Couture standards.
How long does a leather strap last before replacement is necessary?
Longevity depends on the material, tanning method, and intensity of use. Alligator in mineral tanning, worn daily under normal conditions, retains structural integrity for 4–6 years. Shell cordovan, if properly maintained with appropriate creams, can extend its lifespan to 8–10 years, developing a precious patina in the process. Vegetable-tanned calf, more delicate, requires systematic maintenance and typically lasts 3–5 years before showing signs of failure. Characteristic wear—micro-cracking, loss of fibre elasticity, weakening of pin anchorage—signals replacement time. With an 18-month warranty on manufacturing defects, Casati Milano ensures the strap arrives in optimal condition.
The next step
The right strap isn't chosen. It is built, together.
From the atelier appointment to delivery, every step is made for those who know that things done well take time. Rare leathers, one piece at a time, eighteen months of warranty.
Request an appointment →Casati Milano · Via XX Settembre 15, Milan · by appointment only
