Pequignet · Royale Titane
Strap for Royale Titane DLC / Rubber
Takes 20 mm straps. Verified lug width, the straps that fit this model, and answers to the most common questions.
Lug width
Straps for the Royale Titane 9033843 / 30
Selected for the 20 mm lug width · workshop selection
Single Pass Strap Pink — Hammered Calf€80
Vintage Black Calfskin Leather Strap€80
Hammered Calfskin Taupe Strap Ecru Stitching€98
Natural Calfskin NATO Strap€80
Black Saffiano Rubber Strap€105
The Royale Titane 9033843 / 30, seen from the bench
Frequently asked questions
What is the lug width of the Pequignet Royale Titane 9033843 / 30?
The lug width of the Pequignet Royale Titane 9033843 / 30 is 20mm. This measurement corresponds to the distance between the two attachment holes on the case lugs. Any aftermarket strap must be exactly this width to ensure correct insertion without play or forcing. Measurement should be taken from the centre of the upper hole to the centre of the lower hole using a digital calliper or flexible ruler.
What strap is recommended for the Royale Titane 9033843 / 30?
For the Pequignet Royale Titane 9033843 / 30, we recommend alligator leather with vegetable tanning for formal wear, calf leather for daily comfort, technical NATO for sportiness, or FKM rubber for aquatic conditions. The choice depends on intended use and desired aesthetics. The aerospace titanium case naturally pairs with technical materials or fine leathers, avoiding decorative excess. All straps must be 20mm for compatibility.
How do you change the strap on the Pequignet Royale Titane 9033843 / 30?
To change the strap on the Royale Titane 9033843 / 30, you need a spring bar tool (small lever instrument). Insert the flat tip under the lug attachment, applying gentle downward pressure to compress the internal spring. Simultaneously extract the strap with your other hand. To install the new strap, align the strap holes with the lug holes, then reinsert the bars with even pressure until you feel the spring click into place.
Is an aftermarket 20mm strap truly compatible with the 9033843 / 30?
Yes, provided the strap is precisely 20mm and equipped with bars rather than spring bars. The Royale Titane 9033843 / 30 case accepts any strap of this measurement, but it is essential to verify exact width: a 19mm or 21mm strap would cause misalignment or insertion failure. The key is respecting geometry: the aerospace titanium case does not forgive construction inaccuracies in the strap.
How long does a leather strap last on the Royale Titane 9033843 / 30?
The lifespan of a fine leather strap (alligator or calf) depends on frequency of use, climate, and maintenance. Under normal conditions, a quality artisanal strap resists 3-5 years before structural failure. A shell cordovan strap, thanks to fibre density, can last 7-10 years. The key is caring for leather with periodic neutral treatments, avoiding prolonged sun and humidity exposure, and storing it in a dry environment. A well-maintained strap ages gracefully, developing patina that enhances the aesthetic value of the Royale Titane.
The next step
The right strap isn't chosen. It is built, together.
From the atelier appointment to delivery, every step is made for those who know that things done well take time. Rare leathers, one piece at a time, eighteen months of warranty.
Request an appointment →Casati Milano · Via XX Settembre 15, Milan · by appointment only
