Omega · Seamaster Diver 300M

Strap for Seamaster Diver 300M Quartz 28 Stainless Steel / Black / Rubber

Takes 20 mm straps. Verified lug width, the straps that fit this model, and answers to the most common questions.

Lug width20 mm
Case diameter28 mm
Reference2982.50.91
FamilySeamaster Diver 300M
MovementOmega caliber 1424 Hours, Minutes, Seconds | Date | Chronometer
CaseStainless Steel

Recommended spring bar

Spring bars Omega 20mm — 1.8mm diameter

Technical match for lug width and diameter · lug 20 mm · Ø 1.8 mm

All Omega spring barsOpen →

Straps for the Seamaster Diver 300M 2982.50.91

Selected for the 20 mm lug width · workshop selection

All 20 mm straps →

The Seamaster Diver 300M 2982.50.91, seen from the bench

The Seamaster Diver 300M model 2982.50.91 is a compact professional diving watch launched by Omega in 1993. It features a 28mm stainless steel case with a 20mm lug width, housing the Omega 1424 quartz movement with hours, minutes, seconds, date, and COSC chronometer certification. The 316L stainless steel case ensures corrosion resistance to 300 meters depth per ISO 6425 standard, with a unidirectional rotating bezel calibrated in 5-minute increments and a screw-down crown with helium escape valve at 3 o'clock position.

Frequently asked questions

What lug width does the Omega Seamaster Diver 300M 2982.50.91 have?

The Omega Seamaster Diver 300M 2982.50.91 features a lug width of 20mm. This measurement corresponds to the internal distance between the case attachment pins and should be measured with a digital caliper positioned perpendicularly. Any compatible strap must respect this specification to ensure proper fit to the case lugs without mechanical stress.

What strap material is best suited to the Seamaster Diver 300M 2982.50.91?

The material depends on primary use. For daily sportive elegance, we recommend alligator dyed in dark shades (black, navy blue, brown) or vegetable-tanned calf (beige, tobacco). For professional diving use, FKM rubber is the ideal technical choice: waterproof, hypoallergenic, and UV-resistant. The NATO nylon strap remains the most versatile and practical option.

How do you change the strap on the Omega Seamaster Diver 300M?

The strap is replaced by removing the attachment pins located at the case lugs. Use a dedicated tool (spring bar tool) to gently compress the pin while extracting it from the housing. Then position the new strap by aligning the side holes with the pins, and reposition the latter into the lugs. Verify that the strap is firmly secured before wearing the watch. Never force the pins to avoid case damage.

Is the strap of the Seamaster 2982.50.91 compatible with other Omega watches with 20mm lug width?

Yes, any strap with a 20mm lug width is compatible with the Seamaster Diver 300M 2982.50.91, provided the total length allows for the desired wrist fastening. However, consider aesthetic proportion: the compact 28mm diameter of the 2982.50.91 pairs better with straps that are not excessively thick or structured, to avoid visual imbalance. Always verify the lug geometry before purchase.

How long does a leather strap last on this watch?

Durability depends on the material and use. A quality alligator strap with vegetable tanning resists an average of 18-24 months under normal conditions (daily use, quick drying, protection from chemical agents). Calf has similar cycles. FKM rubber can last longer (3-4 years) but requires active maintenance (periodic cleaning and UV protection). Prolonged exposure to sun, constant humidity, and aggressive detergents significantly reduce strap lifespan. Protection with natural waxes extends overall durability.

The next step

The right strap isn't chosen. It is built, together.

From the atelier appointment to delivery, every step is made for those who know that things done well take time. Rare leathers, one piece at a time, eighteen months of warranty.

Request an appointment →

Casati Milano · Via XX Settembre 15, Milan · by appointment only