Mido · Baroncelli

Strap for Baroncelli Heritage Stainless Steel / Black / Bracelet

Takes 20 mm straps. Verified lug width, the straps that fit this model, and answers to the most common questions.

Lug width20 mm
Case diameter39 mm
ReferenceM027.407.11.051.00
FamilyBaroncelli
MovementETA caliber A31.111 hours, minutes, seconds | date
Year2024
CaseStainless Steel

Spring bar

Swiss Standard universal spring bars

The right category for this model · 316L steel, all lug widths 13–26 mm

Straps for the Baroncelli M027.407.11.051.00

Selected for the 20 mm lug width · workshop selection

All 20 mm straps →

The Baroncelli M027.407.11.051.00, seen from the bench

The Baroncelli represents Mido's dress watch line, characterized by a classic and elegant design. It features the ETA A31.111 automatic calibre with hour, minute, second and date indications. The lugs measure 20mm in width.

Frequently asked questions

What is the lug width of the Mido Baroncelli M027.407.11.051.00?

The Mido Baroncelli M027.407.11.051.00 features a 20mm lug width. This measurement was specifically engineered by Mido to maintain harmonious proportions between the 39mm case and the strap attachment points. To verify your watch's lug width, measure the distance from the centre of one lug to the centre of the other lug, on both the top and bottom of the case.

Which strap is most suitable for the Mido Baroncelli M027.407.11.051.00?

The Baroncelli pairs beautifully with vegetable-tanned leather straps, which enhance its classical nature and develop a rich patina over time. For superior moisture resistance, shell cordovan represents the most sophisticated choice. FKM rubber straps offer practicality in sports or working environments, whilst a stainless steel deployante buckle conveys refined elegance. Your choice should reflect both daily usage patterns and personal colour preferences.

How do you change the strap on a Mido Baroncelli M027.407.11.051.00?

Strap replacement requires a spring bar tool. Place the watch on a soft surface and locate the small metal pins (spring bars) at the case ends that secure the strap. Using the spring bar tool, apply gentle upward pressure to one pin, lower the old strap, and insert the new strap ensuring the spring bars seat correctly in their housings. Always verify the strap is properly secured before wearing your watch.

Is an aftermarket strap compatible with the Mido Baroncelli M027.407.11.051.00?

Yes, any strap with a 20mm lug width is compatible with the Baroncelli. Milanostraps.it offers an extensive selection of artisanal 20mm straps: leather, NATO, rubber and other finishes. All straps are tested and ready for installation. The critical factor is confirming the lug width precisely matches 20mm to prevent gaps or excessive tension on the spring bars.

How long does a leather strap last on a Mido Baroncelli M027.407.11.051.00?

Leather strap longevity depends on usage frequency and climate conditions. With moderate daily wear, a vegetable-tanned calf leather strap typically lasts 3-5 years before replacement becomes necessary. Shell cordovan, owing to its inherent qualities, can endure 7-8 years of regular use. Continuous exposure to salt water, excessive perspiration, or extremely dry environments shortens lifespan. Periodic maintenance—cleaning and conditioning—significantly extends strap life.

The next step

The right strap isn't chosen. It is built, together.

From the atelier appointment to delivery, every step is made for those who know that things done well take time. Rare leathers, one piece at a time, eighteen months of warranty.

Request an appointment →

Casati Milano · Via XX Settembre 15, Milan · by appointment only