Longines · Conquest V.H.P.
Strap for Conquest V.H.P. GMT 41 Stainless Steel / Black / Bracelet
Takes 20 mm straps. Verified lug width, the straps that fit this model, and answers to the most common questions.
Lug width
Straps for the Conquest V.H.P. L3.718.4.56.6 (aka: L37184566)
Selected for the 20 mm lug width · workshop selection
Hammered Calfskin Watch Strap Green with Ecru Stitching€98
Hammered Yellow Strap with Ecru Stitching€98
Black Calfskin Rally Watch Strap – Handmade in Milan€110
Red Suede Strap with Stitching — Milano Straps€90
Grand Cavalier Military Brown Leather Strap€120
The Conquest V.H.P. L3.718.4.56.6 (aka: L37184566), seen from the bench
Frequently asked questions
What is the lug width of the Longines Conquest V.H.P. L3.718.4.56.6?
The lug width of the Longines Conquest V.H.P. L3.718.4.56.6 is 20mm. This measurement represents the internal distance between the springbar lugs on the case. To verify correctly, use a digital calliper by positioning the callipers into the internal lateral spaces of the lugs, excluding the case edge. Accurate measurement is essential for ordering compatible straps.
What is the best strap for the Longines Conquest V.H.P. L3.718.4.56.6?
The ideal material depends on use context. For formal elegance, alligator from Italian vegetable tanning represents the supreme choice: regular grain, structural robustness, and natural patina that develops over time. Italian vitello box offers aesthetic versatility and practicality. Shell cordovan guarantees rigidity and moisture resistance for sports use. NATO or rubber straps are pragmatic options for nautical contexts. The brushed stainless steel case of the Conquest harmonises with all these choices whilst maintaining formal coherence.
How do I change the strap on the Longines Conquest V.H.P. L3.718.4.56.6?
Changing the strap on the L3.718.4.56.6 requires only a few minutes. The case uses sprung lug attachments (springbar). Using a dedicated tool (spring bar tool) or a small flat-head screwdriver, apply gentle pressure to one side of the internal lug, lifting the springbar until it releases. Fully extract the bar from the first lug, then proceed to the second. Insert the new strap by aligning the hole with the springbar, pressing until it clicks into position. Repeat on the other side. Avoid excessive pressure that could deform the springbar.
Can I use an aftermarket strap compatible with the Longines Conquest V.H.P. L3.718.4.56.6?
Yes, the Longines Conquest V.H.P. L3.718.4.56.6 accepts any 20mm artisanal strap with standard sprung lug attachment. MilanoStraps offers straps in alligator, vitello, shell cordovan and technical fabrics, custom-made for wrist length, colouration, initials and stitching thread type. Using quality aftermarket straps does not affect Longines warranty, provided only suitable springbars are used and the case is not damaged during installation.
How long does a leather strap last on the Longines Conquest V.H.P. L3.718.4.56.6?
Leather strap longevity varies by material, usage and maintenance. Italian vegetable-tanned alligator resists 5–7 years under moderate daily use, developing a noble patina. Vitello box, more sensitive to moisture, offers 3–5 years on moderate wrist wear. Shell cordovan, thanks to internal varnishing, can reach 7–10 years even with frequent perspiration. MilanoStraps provides 18 months coverage on structural wear. To extend durability, avoid prolonged exposure to water and direct perspiration, apply vegetable wax every 4–6 months, and store away from direct heat sources.
The next step
The right strap isn't chosen. It is built, together.
From the atelier appointment to delivery, every step is made for those who know that things done well take time. Rare leathers, one piece at a time, eighteen months of warranty.
Request an appointment →Casati Milano · Via XX Settembre 15, Milan · by appointment only
