Longines · Conquest Classic
Strap for Conquest Classic Automatic 29.5 Stainless Steel / Red Gold / White / Strap
Takes 20 mm straps. Verified lug width, the straps that fit this model, and answers to the most common questions.
Lug width
Straps for the Conquest Classic L2.285.5.76.3 (aka: L22855763)
Selected for the 20 mm lug width · workshop selection
Vintage Black Calfskin Leather Strap€80
Hammered Calfskin Strap Light Blue€98
Hammered Calfskin Watch Strap Green with Ecru Stitching€98
Vintage Olive Green Calf Leather Watch Strap€80
Hammered Black Calfskin Strap — Ecru Stitching€98
The Conquest Classic L2.285.5.76.3 (aka: L22855763), seen from the bench
Frequently asked questions
What is the lug width of the Longines Conquest Classic L2.285.5.76.3?
The Longines Conquest Classic L2.285.5.76.3 features a lug width of 20mm. This measurement is calculated as the internal distance between the two metal pins that connect the case to the strap, not the external case width. It is essential to verify this dimension before purchasing an aftermarket strap, as an incorrect lug width would result in complete incompatibility with the timepiece.
What is the best strap for the Longines Conquest Classic L2.285.5.76.3?
The ideal strap depends on usage and aesthetic preferences. Alligator represents the natural luxury choice, with fine, uniform grain that enhances the elegance of the two-tone case. Calf leather offers a more rustic and informal alternative. For sport-daily use, a NATO strap in neutral tones or a synthetic rubber strap ensures practicality without aesthetic compromise. For character and natural evolution over time, vegetable-tanned leather develops a unique patina.
How do you change the strap on a Longines Conquest Classic?
Strap replacement on the L2.285.5.76.3 is performed by removing the spring bars. Position the watch horizontally, access the lower section of the lug using a dedicated tool (spring bar pen or extractor), press the internal elastic piston to release the pin, then remove it. Repeat for both sides. Insert the new pins into the replacement strap and position onto the case lugs, verifying engagement. The operation requires care to avoid scratching the two-tone case.
Is an aftermarket strap compatible with the Longines Conquest Classic L2.285.5.76.3?
Yes, any strap with a 20mm lug width is compatible with the L2.285.5.76.3, regardless of manufacturer. Artisanal milanostraps.it straps are specifically designed for this measurement and offer superior quality compared to generic solutions. Always verify the lug width before purchasing, and if the strap has a deployant clasp, ensure it is compatible with the case thickness (approximately 11-12mm).
How long does a leather strap last on a watch like the Longines Conquest Classic?
Longevity depends on the material and intensity of use. A high-quality alligator or calf leather strap offers 5-7 years of average daily use with periodic maintenance (gentle cleaning, natural drying). Vegetable-tanned leather tends to last longer as it develops a protective patina over time. A shell cordovan strap can exceed 10 years. Synthetic rubber or NATO straps have similar longevity but require minimal maintenance. Storage in a non-humid environment and moderate sun exposure significantly extend the strap's useful life.
The next step
The right strap isn't chosen. It is built, together.
From the atelier appointment to delivery, every step is made for those who know that things done well take time. Rare leathers, one piece at a time, eighteen months of warranty.
Request an appointment →Casati Milano · Via XX Settembre 15, Milan · by appointment only
