TAG Heuer · Aquaracer

Strap for Aquaracer Quartz 300M 41 Stainless Steel / White / Bracelet

Takes 20 mm straps. Verified lug width, the straps that fit this model, and answers to the most common questions.

Lug width20 mm
Case diameter41 mm
ReferenceWBD1111.BA0928
FamilyAquaracer
MovementQuartz
Year2018
CaseStainless Steel

Spring bar

Swiss Standard universal spring bars

The right category for this model · 316L steel, all lug widths 13–26 mm

Straps for the Aquaracer WBD1111.BA0928

Selected for the 20 mm lug width · workshop selection

All 20 mm straps →

The Aquaracer WBD1111.BA0928, seen from the bench

The TAG Heuer Aquaracer WBD1111.BA0928 is a 41mm stainless steel dive watch representing the modern evolution of an icon launched in 2004. It features 300m water resistance, a unidirectional 60-minute bezel, and quartz movement ensuring precision and minimal maintenance. The 316L stainless steel case resists corrosion in salt environments, while applied indices and luminous hands enable readability in low light. The 20mm lug width allows compatibility with a wide range of aftermarket straps.

Frequently asked questions

What is the lug width of the TAG Heuer Aquaracer WBD1111.BA0928?

The lug width of the TAG Heuer Aquaracer WBD1111.BA0928 is 20mm. This measurement represents the distance between the two attachment pins that connect the strap to the watch case. Always verify this specification before purchasing a replacement strap, as an incorrect size would result in incompatibility with your timepiece.

What type of strap is recommended for the TAG Heuer Aquaracer WBD1111.BA0928?

The TAG Heuer Aquaracer WBD1111.BA0928, being a versatile sports watch, accommodates various strap types. For formal wear, straps in alligator, shell cordovan, or vegetable-tanned leather create elegant contrast with the stainless steel case. For intensive use or diving, synthetic rubber or NATO fabric straps ensure maximum durability and practicality. Your choice should reflect the primary use case and personal comfort preferences.

How do you change the strap on a TAG Heuer Aquaracer WBD1111.BA0928?

To change the strap on the TAG Heuer Aquaracer WBD1111.BA0928, you must remove the spring bars that attach the strap to the watch lugs. Using a spring bar remover tool, push the pin inward to release it from one side, slide out the old strap, and insert the new strap by aligning the holes with the pins. The procedure is straightforward but requires care to avoid scratching the case. If unsure, contact the Casati Milano atelier for professional assistance.

Which aftermarket strap is compatible with the TAG Heuer Aquaracer WBD1111.BA0928?

Any strap with a 20mm lug width is compatible with the TAG Heuer Aquaracer WBD1111.BA0928. On milanostraps.it you will find an extensive selection of artisanal 20mm straps, customisable in leather, premium hides, fabric and rubber. Ensure the strap is constructed with appropriate thickness (typically 3-4mm for leather) so it seats properly in the case attachments without forcing.

How long does a leather strap last on a TAG Heuer Aquaracer WBD1111.BA0928?

The lifespan of a leather strap depends on material quality, frequency of use, and environmental conditions. An artisanal strap in alligator or shell cordovan typically lasts 5-8 years under normal use, particularly benefiting from natural patina development. A vegetable-tanned leather strap generally lasts 3-5 years. Casati Milano atelier offers an 18-month warranty and provides maintenance support to extend your strap's service life.

The next step

The right strap isn't chosen. It is built, together.

From the atelier appointment to delivery, every step is made for those who know that things done well take time. Rare leathers, one piece at a time, eighteen months of warranty.

Request an appointment →

Casati Milano · Via XX Settembre 15, Milan · by appointment only