Rolex · Sea-Dweller
Strap for Sea-Dweller Deepsea
Takes 21 mm straps. Verified lug width, the straps that fit this model, and answers to the most common questions.
Lug width
Straps for the Sea-Dweller 136660-0006 (aka: m136660-0006)
Selected for the 21 mm lug width · workshop selection
Red Alligator Strap Water Resistant€195
Matte Dark Brown Alligator Strap€195
Matte Grey Alligator Strap€195
Hammered calfskin strap in cuoio€98
Grey Hammered Leather Strap with Ecru Stitching€98
The Sea-Dweller 136660-0006 (aka: m136660-0006), seen from the bench
Frequently asked questions
What is the lug width of the Rolex Sea-Dweller 136660-0006?
The lug width of the Rolex Sea-Dweller 136660-0006 is 21 millimetres. This measurement represents the distance between the case lugs and is the fundamental parameter for selecting a compatible strap. This width is specific to the latest generation Sea-Dweller models and excludes standard 20mm or 22mm straps. To verify compatibility, measure the perpendicular distance between the lateral lugs of the case.
What strap is recommended for the Sea-Dweller 136660-0006?
For the Sea-Dweller 136660-0006, three primary solutions are recommended: tail alligator for evolved elegance and natural patina development; European vegetable-tanned calf for versatility and uniform texture; high-density rubber for technical practicality and post-immersion cleaning ease. Choice depends on usage: if the Rolex is intended for regular diving, rubber maintains superior performance; if worn primarily in formal contexts, alligator or calf create sophisticated aesthetic contrasts with the titanium case.
How do you change the strap on the Sea-Dweller 136660-0006?
Strap replacement requires a spring bar tool to extract the pins. After removing the worn strap, insert the new pins into the replacement strap, aligning them with the case lugs. Press slowly until the click of engagement is heard, verifying that both pins are correctly seated. If the Rolex has a deployant clasp, ensure the opening spring is intact before mounting the new strap. For models with proprietary pins, consult an expert before proceeding.
Is a 21mm aftermarket strap compatible with the Rolex Sea-Dweller 136660-0006?
Yes, an aftermarket strap specifically designed for 21mm lug width is fully compatible with the Sea-Dweller 136660-0006 and perfectly replaces the original Rolex strap. However, it is essential to verify that the strap is explicitly labelled for 21mm width: tolerances of even 0.5mm create visible misalignment and instability. Bespoke leather straps guarantee complete compatibility and allow personalisation of leather grain, thickness, and closure type (deployant, pin buckle, hook clasp).
How long does a leather strap last on the Sea-Dweller 136660-0006?
The lifespan of a leather strap depends on usage and material quality. Premium European vegetable-tanned calf typically lasts 3-5 years with daily wear; alligator, due to superior density, can extend resistance to 6-7 years. High-density rubber resists over 10 years without visible degradation. If the strap is exposed to humid environments or frequent diving, annual replacement is recommended to ensure case sealing performance. Casati Milano offers 18 months warranty on manufacturing defects and recommends service after 24 months of continuous use.
The next step
The right strap isn't chosen. It is built, together.
From the atelier appointment to delivery, every step is made for those who know that things done well take time. Rare leathers, one piece at a time, eighteen months of warranty.
Request an appointment →Casati Milano · Via XX Settembre 15, Milan · by appointment only

