Oris · TT3

Strap for Oris TT3 01 674 7611 7764

Takes 28 mm straps. Verified lug width, the straps that fit this model, and answers to the most common questions.

Lug width28 mm
Case diameter44 mm
Reference01 674 7611 7764
FamilyTT3
MovementOris caliber Oris 674 hours, minutes, small seconds | date | Chronograph

Spring bar

Swiss Standard universal spring bars

The right category for this model · 316L steel, all lug widths 13–26 mm

The TT3 01 674 7611 7764, seen from the bench

The Oris TT3 reference 01 674 7611 7764 features a 44mm titanium case with 28mm lugs. It is powered by the Oris 674 automatic caliber with hours, minutes, small seconds, date and chronograph functions. The model is part of the brand's sporty collection dedicated to automotive competitions.

Frequently asked questions

What is the lug width of the Oris TT3 01 674 7611 7764?

The Oris TT3 01 674 7611 7764 features a lug width of 28mm. This measurement, also called lug distance or ansa width, is the internal distance between the two spring bars that connect the strap to the case. It is essential for selecting compatible straps, as a 26mm or 30mm lug width will not fit correctly and may cause damage to the lug holes. You can verify this easily with a calliper or ruler.

What is the best strap for the Oris TT3 01 674 7611 7764?

There is no single "best" strap; it depends on your use case. For tactical elegance: natural alligator in black or deep brown. For daily versatility: vegetable-tanned calf leather in cognac or tobacco. For sports and activity: NATO in Cordura nylon or grey-green canvas. For water and hot climates: vulcanised rubber with a deployante. Each choice amplifies a different aspect of the TT3's technical nature. MilanoStraps stocks all these options in 28mm.

How do I change the strap on the Oris TT3 01 674 7611 7764?

Strap replacement is simple and requires no special tools. Position the watch on a soft surface, face up. Locate the two spring bars (perns) at the ends of the current strap. Using a ballpoint pen or spring bar tool, gently press each bar towards the centre of the case to release the internal spring. Once disengaged from one side, remove the old strap. Position the spring bars of the new strap into the lug holes and press until you hear a click. Verify that both sides are firmly seated. The entire process takes less than a minute.

Can I use an aftermarket compatible strap on the Oris TT3 01 674 7611 7764?

Yes, absolutely. An aftermarket strap of good quality with a 28mm lug width is fully compatible. Ensure the strap features standard-diameter spring bars of appropriate length. MilanoStraps' 28mm straps are crafted with stainless steel bars and tested on Oris models: they guarantee compatibility and durability. The quality of Italian artisanal leather or fabric often surpasses the factory strap.

How long does a leather strap last on a watch like the Oris TT3 01 674 7611 7764?

Durability depends on use and maintenance. A high-quality alligator or vegetable-tanned calf strap, with solid stitching, lasts 3–5 years if worn daily. If used occasionally, even 7–10 years is achievable. Ageing is natural: it develops patina, flexes, and gains the memory of your wrist. We advise against prolonged water exposure or direct UV rays. A vegetable-tanned calf ages gracefully; synthetics tend to delaminate. With minimal care—quarterly cleaning and annual conditioning cream—a genuine leather strap becomes more beautiful and comfortable over time.

The next step

The right strap isn't chosen. It is built, together.

From the atelier appointment to delivery, every step is made for those who know that things done well take time. Rare leathers, one piece at a time, eighteen months of warranty.

Request an appointment →

Casati Milano · Via XX Settembre 15, Milan · by appointment only