Oris · TT3
Strap for Oris TT3 01 673 7587 7084
Takes 28 mm straps. Verified lug width, the straps that fit this model, and answers to the most common questions.
Lug width
The TT3 01 673 7587 7084, seen from the bench
Frequently asked questions
What is the lug width of the Oris TT3 01 673 7587 7084?
The Oris TT3 01 673 7587 7084 features a lug width of 28mm. This measurement represents the internal diameter of the case lugs, where the watch strap must be inserted. To verify this measurement, remove the original strap and measure the distance between the two lugs perpendicularly using a digital calliper. At 28mm, this is a relatively narrow lug width that allows for the use of higher-quality straps without construction compromises on the lugs themselves.
What is the best strap for the Oris TT3 01 673 7587 7084?
There is no universal choice; it depends on the primary intended use. For tactical applications and moisture resistance, a military-grade cotton/polyester NATO strap or a butyl rubber sole represents the extreme solution. For mixed applications (tactical and formal), vegetable-tanned calf leather develops a natural patina that improves grip and tactile sensitivity over time. For pure elegance, black alligator or shell cordovan (if available in 28mm) confer gravitas without compromising the chronograph's functional identity.
How do I change the strap on my Oris TT3 01 673 7587 7084?
Strap replacement is a straightforward operation: lift the lug outward using a dedicated tool (spring bar tool) or a thin, non-sharp implement such as the back of a pocket knife. Insert the tool into the tiny hole located laterally on the lug, applying outward pressure to compress the internal spring. Extract the lug from the case and remove the previous strap. Insert the new strap onto the lugs and, using the same tool, reinsert the lugs into the case holes until they click into place. Verify that the strap has no lateral play.
Can I use a quality aftermarket strap on an Oris TT3 01 673 7587 7084?
Absolutely. The critical requirement is that the strap is specifically compatible with the 28mm lug width. An aftermarket strap in alligator, calf, or NATO from specialist manufacturers often delivers construction quality superior to the stock strap, with more deliberate material selection and artisanal craftsmanship. Before purchase, always confirm that the manufacturer specifies compatibility with 28mm. The finest aftermarket straps also offer colour and grain customisation options, adapting seamlessly to your TT3's tactical aesthetic.
How long does a leather strap last on an Oris TT3 01 673 7587 7084?
Leather strap durability depends on three factors: material, tanning method, and frequency of use. Vegetable-tanned calf leather, worn daily whilst protected from corrosive liquids, lasts between 3 and 5 years before requiring replacement due to structural leather wear. High-quality alligator, subjected to less intense flexion, reaches 5-7 years. Shell cordovan, extraordinarily dense, can exceed 10 years. Factors accelerating ageing include direct sunlight exposure, frequent contact with fresh or salt water without immediate drying, and sweat accumulation. Regular maintenance with leather-specific conditioners significantly extends strap lifespan.
The next step
The right strap isn't chosen. It is built, together.
From the atelier appointment to delivery, every step is made for those who know that things done well take time. Rare leathers, one piece at a time, eighteen months of warranty.
Request an appointment →Casati Milano · Via XX Settembre 15, Milan · by appointment only
