Longines · Conquest Heritage
Strap for Conquest Heritage 40 Stainless Steel / Blue
Takes 20 mm straps. Verified lug width, the straps that fit this model, and answers to the most common questions.
Lug width
Straps for the Conquest Heritage L1.650.4.92.2
Selected for the 20 mm lug width · workshop selection
Vintage Black Calfskin Leather Strap€80
Hammered Calfskin Strap Light Blue€98
Hammered Calfskin Watch Strap Green with Ecru Stitching€98
Vintage Olive Green Calf Leather Watch Strap€80
Hammered Black Calfskin Strap — Ecru Stitching€98
The Conquest Heritage L1.650.4.92.2, seen from the bench
Frequently asked questions
What is the lug width of the Longines Conquest Heritage L1.650.4.92.2?
The lug width of the Longines Conquest Heritage L1.650.4.92.2 is 20 millimetres. This measurement must be verified internally, between the terminals that connect to the case, exactly where the strap contacts the pins. An incorrect measurement is the most common cause of incompatibility: do not confuse lug width with the visual width of the lug housing itself.
What is the best strap for the Longines Conquest Heritage L1.650.4.92.2?
The best strap depends on intended use and personal taste. For classical elegance, we recommend American alligator in dark brown or black: the regular texture dialogues perfectly with the satin dial. For those seeking natural patina and superior density, shell cordovan is the connoisseur's choice. For contemporary versatility, vegetable-tanned calf offers breathability, fine grain, and aesthetic ageing. For aquatic environments, FKM rubber or nylon NATO straps guarantee waterproofing.
How do you change the strap on a Longines Conquest Heritage?
Remove the strap by gently extracting the spring bars (or removable lugs, if present) connecting the strap to the case. Use a spring bar tool: insert the tip into the small slot beneath the lug, lift the bar slightly upward, and the strap will release. Proceed carefully to avoid scratching the steel. The new strap must have exactly 20mm lug width and be threaded first on one side, then the other, ensuring the bars are fully seated.
Can I use an aftermarket strap on this Longines model?
Yes, absolutely. Any strap with a 20mm lug width is compatible, regardless of manufacturer. Artisanal straps of quality (leather, rubber, NATO) often provide a superior experience to OEM bracelets, allowing customisation in leather type, colour, thread colour, and finishing. Always verify that the internal width is exactly 20mm and that the total length is appropriate for your wrist (typically 75–110mm for the upper segment and 110–140mm for the lower segment).
How long does a leather strap last on a watch like the Conquest Heritage?
The lifespan of a leather strap depends on species, tanning method, use, and maintenance. A quality artisanal strap in alligator or shell cordovan lasts 5–8 years of daily wear, sometimes longer. Vegetable-tanned calf, more delicate, lasts 3–6 years. Leather wears where the wrist flexes and where pins contact the material. Frequent exposure to water, perspiration, and direct sunlight shortens lifespan. Regular cleaning with a soft cloth and annual maintenance (reconditioning) significantly extend durability. Artisanal straps with 18-month guarantees offer pin replacement and reconditioning services.
The next step
The right strap isn't chosen. It is built, together.
From the atelier appointment to delivery, every step is made for those who know that things done well take time. Rare leathers, one piece at a time, eighteen months of warranty.
Request an appointment →Casati Milano · Via XX Settembre 15, Milan · by appointment only
