Certina · DS First

Strap for DS First Ceramic Chronograph Bracelet

Takes 22 mm straps. Verified lug width, the straps that fit this model, and answers to the most common questions.

Lug width22 mm
Case diameter41 mm
ReferenceC0144171105100
FamilyDS First
MovementETA caliber 251.262 Hours, Minutes, Small Seconds | Date | Chronograph
CaseCeramic, Stainless Steel

Spring bar

Swiss Standard universal spring bars

The right category for this model · 316L steel, all lug widths 13–26 mm

Straps for the DS First C0144171105100

Selected for the 22 mm lug width · workshop selection

All 22 mm straps →

The DS First C0144171105100, seen from the bench

The Certina DS First mounts the ETA 251.262 caliber with hour, minute, small seconds, date and chronograph functions. The reference C0144171105100 features 22mm lugs. The movement ensures chronograph functionality along with the date display.

Frequently asked questions

What is the lug width of the Certina DS First C0144171105100?

The lug width of the Certina DS First C0144171105100 is 22mm, measured between the centres of the spring bars. This dimension is precise and does not permit variation: any compatible strap must measure exactly 22mm wide to ensure correct fitment without excessive play or forcing.

Which strap is recommended for the Certina DS First C0144171105100?

The best strap depends on intended use and aesthetic preference. For a formal-sportive approach, we recommend Tuscan vegetable-tanned leather in brown or grey calf; for aquatic environments, rubber or silicone; for vintage aviation aesthetics, grey canvas NATO. For those who appreciate discreet luxury, black alligator leather with medium grain offers the finest equilibrium between elegance and technical robustness.

How do I change the strap on the Certina DS First C0144171105100?

Strap replacement requires a dedicated spring bar tool and a few minutes of careful attention. Position the watch on a soft surface, insert the small hook of the tool beneath the spring bar on one side of the case, lift the bar and extract the previous strap. Repeat on the opposite side, then position the new strap's bars into the case lugs and press until you hear the detent click. If uncertain, consult a professional watchmaker.

Can I use an aftermarket strap on this Certina DS First C0144171105100?

Yes, any aftermarket strap with a 22mm lug width is compatible with the C0144171105100. Ensure, however, that the strap is constructed with quality spring bars and that its thickness corresponds to your watch case; if the strap is excessively thick, it may not seat correctly within the lug apertures. On milanostraps.it you will find straps selected and tested for this specific width.

How long does a leather strap last on the Certina DS First C0144171105100?

A Tuscan vegetable-tanned leather strap typically lasts 3-5 years with daily wear, depending upon care and exposure to moisture and sunlight. Shell cordovan exhibits slightly longer longevity, approximately 4-6 years. Alligator, being a harder and more fibrous leather, may last 5-7 years. The natural patina that develops is a characteristic, not a defect, and represents the daily "passport" of the strap. Avoid prolonged water immersion and store your watch in a dry environment when not in use.

The next step

The right strap isn't chosen. It is built, together.

From the atelier appointment to delivery, every step is made for those who know that things done well take time. Rare leathers, one piece at a time, eighteen months of warranty.

Request an appointment →

Casati Milano · Via XX Settembre 15, Milan · by appointment only