Certina · DS-2
Strap for DS-2 Chronograph Stainless Steel / Black / Bracelet
Takes 22 mm straps. Verified lug width, the straps that fit this model, and answers to the most common questions.
Lug width
Straps for the DS-2 C024.447.44.051.00
Selected for the 22 mm lug width · workshop selection
Saffiano Black Strap Tone Stitching€90
Dark Brown Saffiano Strap with Ecru Stitching€90
Natural Calfskin Rally Strap€110
Black Saffiano Rubber Strap€105
Dark Brown Calfskin Military Strap€80
The DS-2 C024.447.44.051.00, seen from the bench
Frequently asked questions
What is the lug width of the Certina DS-2 C024.447.44.051.00?
The lug width of the Certina DS-2 C024.447.44.051.00 is 22mm. This measurement represents the internal distance between the upper lugs of the stainless steel case. It is critical to measure accurately using a digital calliper, positioning the tip perpendicularly between the two attachment points: a tolerance of even 0.5mm compromises strap stability.
What is the best strap for the Certina DS-2 C024.447.44.051.00?
We recommend three options for the DS-2. First: vegetable-tanned leather (Tuscan or German) at 1.4–1.6mm thickness, natural grain, in cognac brown, bordeaux or black. Second: alligator or African crocodile, offering sophistication whilst maintaining sportiveness. Third: NATO or vulcanised rubber strap to emphasise the pure technical identity. Choice depends on dial colour: on blue, cognac brown; on grey, black; on silver, tan or shell cordovan. Avoid excessive padding or modern finishes: the DS-2 operates with constructive depth.
How do you change the strap on the Certina DS-2 C024.447.44.051.00?
Strap change requires a specialised spring bar tool. Position the watch on a soft, dry surface. Insert the sharp tip of the spring bar tool into the visible hole beneath the lug, gently pushing to release the pin pressure. Remove the old strap, then insert the new one, aligning the holes with the lugs. Repeat for both sides. Do not force: a properly balanced pin clicks into place with minimal pressure. If unsure, consult a qualified watchmaker.
Is an aftermarket strap compatible with the Certina DS-2 C024.447.44.051.00?
Yes, provided it is specifically 22mm. Compatibility depends on constructive tolerance: the spring bar diameter must be 1.8mm ±0.05, the international standard. We recommend straps of build quality equivalent to Swiss movement standards: artisanal leather with vegetable tanning or noble hides such as alligator. An economical strap compromises the experience of a watch of this calibre. Milano Straps are constructed with precise tolerances and selected materials.
How long does a leather strap last on the Certina DS-2 C024.447.44.051.00?
Longevity depends on use and maintenance. Vegetable-tanned Tuscan leather, properly cared for (gentle cleanser, rapid drying, nourishing cream every 6 months), lasts 4–6 years in daily wear, developing fascinating patina. Alligator, with denser fibre, may last 6–8 years. NATO and rubber exceed 5–7 years without aesthetic degradation. A strap on occasional-use DS-2 (office, weekends) can reach 8–10 years. Critical factors: avoid saltwater without immediate rinse, protect from prolonged nocturnal humidity, rotate straps to reduce leather fatigue.
The next step
The right strap isn't chosen. It is built, together.
From the atelier appointment to delivery, every step is made for those who know that things done well take time. Rare leathers, one piece at a time, eighteen months of warranty.
Request an appointment →Casati Milano · Via XX Settembre 15, Milan · by appointment only
