Strap for Superocean 44

The Breitling Superocean A1739102BA80134A has a lug width of 20mm. This measurement should be taken with a digital calliper inside the gap between the two lugs on the case, not on the existing strap. Any strap with a 20mm attachment is compatible with this reference.

For the Superocean A1739102BA80134A, the choice depends on intended use: vegetable-tanned alligator leather creates an elegant contrast between the tool-watch case and a bespoke material; a vulcanised rubber strap honours the model's diving vocation; a cordura NATO strap offers everyday versatility. A steel deployant clasp is recommended with any leather strap to preserve its structure over time.

Strap replacement requires a fine-tipped springbar tool. Insert the tool into the lateral slot of the lug to compress the spring bar and release the strap. Care should be taken to avoid scratching the steel lugs: protecting the case with a soft cloth is strongly advised. The standard spring bar for this model has a diameter of 1.8mm and a length of 20mm.

Yes. As the lug width is a standard 20mm, the aftermarket offer is extensive. Milanostraps.it produces handcrafted compatible straps in alligator, vegetable-tanned calf leather, rubber and NATO, manufactured with dimensional specifications — length, heel thickness and tip thickness — optimised for the 44mm Superocean case and its short lugs.

A quality leather strap, properly maintained, typically lasts 2 to 4 years of daily wear. Given the Superocean's sporting vocation, prolonged contact with salt water or chlorine must be avoided, as both deteriorate the leather fibres. Vegetable-tanned leather develops an authentic patina over time but requires periodic conditioning with natural wax. Casati Milano straps carry an 18-month warranty against manufacturing defects.