Breitling · Navitimer
Strap for Navitimer B01 Chronograph 43 Stainless Steel / Wempe Signature Collection / Bracelet
Takes 22 mm straps. Verified lug width, the straps that fit this model, and answers to the most common questions.
Lug width
Straps for the Navitimer AB01387A1C1A1 (aka: BL500266)
Selected for the 22 mm lug width · workshop selection
Matte Dark Brown Alligator Strap€195
Matte Black Alligator Strap€195
Matte Dark Gray Alligator Strap€195
Vintage Brown Calfskin Strap — Natural Patina€98
Vintage Olive Green Calf Leather Watch Strap€80
The Navitimer AB01387A1C1A1 (aka: BL500266), seen from the bench
Frequently asked questions
What is the lug width of the Breitling Navitimer AB01387A1C1A1?
The Breitling Navitimer AB01387A1C1A1 has a lug width of 22mm. This measurement is taken between the two lower lugs using a millimetre calliper, at the point where the strap meets the case, excluding the outer lug tips. Any strap with a 22mm attachment will be compatible with this reference.
What is the best strap for the Breitling Navitimer AB01387A1C1A1?
For the Navitimer AB01387A1C1A1 in 43mm stainless steel, the most suitable straps are vegetable-tanned Tuscan calfskin for a heritage aesthetic, shell cordovan for those seeking long-term resilience and patina development, or Mississippi alligator for formal occasions. A brushed stainless steel deployant clasp completes the pairing whilst maintaining visual coherence with the case. For sporting use, a ballistic nylon NATO strap reinforces the watch's aeronautical DNA.
How do you change the strap on a Breitling Navitimer AB01387A1C1A1?
To replace the strap on the Navitimer AB01387A1C1A1, use a spring bar tool or a fine-tipped pin. Compress the spring bar between the two lugs by gently applying leverage with the tool, remove the strap, then insert the new one with the spring bar pre-compressed. Care must be taken to avoid scratching the stainless steel case: it is advisable to protect the lugs with low-tack adhesive tape during the procedure.
Are there aftermarket straps compatible with the Breitling Navitimer AB01387A1C1A1?
Yes, all straps with a standard 22mm attachment are compatible with the Breitling Navitimer AB01387A1C1A1. Milano Straps offers a selection of Italian handcrafted straps in leather, alligator, shell cordovan and technical materials, made using the same artisanal techniques as high-end strap manufacturers, with stainless steel buckle or deployant clasp. The standard length is 120/75mm to suit the majority of wrist sizes.
How long does a leather strap last on the Breitling Navitimer AB01387A1C1A1?
The lifespan of a leather strap for the Navitimer AB01387A1C1A1 depends on the quality of the tanning, the leather thickness and frequency of use. A quality vegetable-tanned calfskin strap, treated with neutral wax every 3-4 months and kept away from excessive moisture, will retain its characteristics for 2-4 years with daily wear. Shell cordovan, owing to its dense fibrous structure, can exceed 5 years. Casati Milano straps carry an 18-month guarantee against manufacturing defects.
The next step
The right strap isn't chosen. It is built, together.
From the atelier appointment to delivery, every step is made for those who know that things done well take time. Rare leathers, one piece at a time, eighteen months of warranty.
Request an appointment →Casati Milano · Via XX Settembre 15, Milan · by appointment only
